Fujifilm FDR Xair

Technical Specifications

Model Number	XD2000
System Type	Stand-mounted ultra-portable X-ray (battery-capable)
Output Power	450 W (90 kV × 5 mA, sustained 0.1 sec)
Tube Voltage	50–90 kV (2 kV steps)
Tube Current	5 mA fixed
mAs Range	0.20–2.50 mAs (12 steps: 0.20, 0.25, 0.32, 0.40, 0.50, 0.63, 0.80, 1.00, 1.25, 1.60, 2.00, 2.50)
kV Accuracy	±10%
mAs Accuracy	±10%
APR Memory	3 anatomical programmed radiography presets
X-ray Tube	CEI OX80-0.8
Focal Spot	0.8 × 0.8 mm
Target Angle	16°
Inherent Filtration	0.8 mm Al
Total Filtration	≥2.5 mm Al @ 70 kV
Anode Heat Storage	7.0 kJ (10 kHU)
Collimator	Double-slit, manual operation
X-ray Field (max)	43 × 43 cm @ 100 cm SID
X-ray Field (min)	≤5 × 5 cm @ 100 cm SID
Illumination Lamp	3.3 V LED
Display	LCD panel
Battery	Built-in Li-polymer, 11.1 V / 1450 mAh
Battery Life	Up to 100 exposures per full charge
Total mAs / hour	100 mAs/h
Charger Power Supply	100–240 V AC, 50/60 Hz, 1.5 A
Equipment Power	DC 11.1 V ± 0.1 V / 1450 mA
Operating Temperature	15–30 °C
Operating Humidity	15–80% RH
Storage Temperature	−10 to 50 °C (with battery)
Dimensions	301 (W) × 257 (D) × 144 (H) mm
Weight	3.5 kg (7.7 lb) incl. battery
Standard Configuration	X-ray generator, supporting stand, AC adapter, shoulder strap, tape measure
Available Stands	XD2000 ST (1600 × 1000 × 2100 mm, 7.6 kg) / XD2000 ST-M (700 × 700 × 1900 mm, 11.5 kg) / XD2000 ST-S (800 × 950 × 1600 mm, 2.8 kg)
Optional	XD2000 RS (IR remote switch)
Compatible Detector	FDR D-EVO II (with Console Advance, Virtual Grid, Dynamic Visualization II)
Use Restriction	Stand-mounted use only — not approved for handheld operation (per Fujifilm safety notification, Feb 2025)
Manufacturer	FUJIFILM Corporation

Fujifilm Fujifilm FDR Xair

The Fujifilm FDR Xair (model XD2000) is one of the world’s lightest portable X-ray units — just 3.5 kg (7.7 lb) including battery — engineered to bring diagnostic imaging directly to patients in the home, isolation wards, community clinics, and disaster-relief field operations where conventional X-ray equipment cannot go. Its built-in lithium-polymer battery delivers up to 100 exposures per charge in environments without electrical power, and a flat, easy-clean enclosure with grouped one-finger controls simplifies operation in challenging settings. The FDR Xair pairs with Fujifilm’s FDR D-EVO II CsI detector and Console Advance to deliver low-dose, high-resolution images via Virtual Grid image processing and Dynamic Visualization II. Important: the FDR Xair is intended for stand-mounted use only — a supporting stand (XD2000 ST, ST-M, or ST-S) ships standard with the system, and Fujifilm’s February 2025 safety notification specifies that the unit is not approved for handheld operation.

Key Features & Highlights

Just 3.5 kg (7.7 lb) including battery — the world’s lightest stand-mounted portable X-ray
Compact 301 × 257 × 144 mm enclosure designed to fit in a carry case
450 W output (90 kV × 5 mA, 0.1 sec) — sufficient for chest, extremity, and bedside imaging
50–90 kV range in 2 kV steps; 5 mA fixed tube current; 12 mAs steps (0.20–2.50 mAs)
0.8 × 0.8 mm focal spot, 16° target angle, 7.0 kJ (10 kHU) anode heat storage
Built-in Lithium-polymer battery (11.1 V / 1450 mAh) — up to 100 exposures off-grid
AC adapter included (100–240 V, 50/60 Hz, 1.5 A) for mains charging
Double-slit manual collimator with 3.3 V LED illumination lamp
Maximum X-ray field 43 × 43 cm @ 100 cm SID; minimum 5 × 5 cm
3 APR (Anatomical Programmed Radiography) memory programs
IR remote switch (XD2000RS) for technologist distancing
Compatible with FDR D-EVO II + Console Advance, Virtual Grid, Dynamic Visualization II
Stand-mounted operation only — ships with XD2000 ST, ST-M, or ST-S support stand
Designed for home visits, nursing care, isolation wards, clinics, and disaster sites

Ideal Applications

Home Visit ImagingNursing CareIsolation WardsCommunity ClinicsDisaster Response & Field MedicalMobile HealthcareLong-Term CareEquine / Field Veterinary